Watch Videos
Lift power and reach, at the touch of a button
We designed the Carolift® 100 hoist to be simple to use yet powerful enough to lift any wheelchair, scooter or other mobility device weighing up to 100 kg into the boot of your car. You control the hoist via an intuitive four-button hand control, and it does its job in about a minute.
The Carolift 100 is made in Sweden and crash tested for your safety.
Powered operation
Via the hand control, the Carolift 100 hoist does all the heavy work for you. It lifts and rotates the cargo into the boot of your car. All you need to do is lend a slight guiding hand.
Quick operation
The Carolift 100 hoist does its job very quickly. Loading or unloading your mobility device can be done in around a minute. All movement is at a smooth and constant pace, you’ll be in total control all the time.
Easy to use
The clever design of the Carolift 100 shines through in its ease of use. Open your boot, deploy the lift over your mobility device and lower the lift arm. Once within reach, you connect the clever lifting straps. Use as much slack as you need to fit the buckle on the mobility device. Pulling on the loop will tighten both sides simultaneously. Don’t worry if the strap is longer on one side. The Carolift 100 will self-balance the load as soon as it leaves the ground.
To stow the cargo into your vehicle, simply push the designated button while gently guiding your mobility device to the correct place.
Hand control
As a four-way hoist, the Carolift 100 can move: up, down, in and out. Controlling the hoist is precise and direct. The four-button hand control is very easy to use. Clear markings on the buttons describe what action the hoist performs when pressed.
Smartphone compatible
You can also control the Carolift 100 with your smartphone via our Remote app. This requires fitting your Carolift 100 with the BraunAbility Remote receiver kit.
Lifts up to 100 kg
The Carolift 100 will lift any mobility device weighing up to 100 kg. That doesn’t mean that your mobility device must be on the higher end of the scale. The Carolift can be just as good a match to a 20 kg mobility device as to a 95 kg mobility device.
Full seat capacity
Since the Carolift 100 installs in the luggage compartment, you don’t have to sacrifice any seats to fit the hoist. This, of course, requires that your mobility device fits into the boot of your car. It's worth noting that it's possible to partially dismantle many scooters and power chairs to make them fit into the boot of a car.
Universal fit
The Carolift 100 is suitable for use with most car models and makes. The most important thing is, of course, that your mobility device will fit in the boot of the car. Luckily, it's often possible to dismantle wheelchairs, scooters and power chairs to make them smaller for transportation.
Contact your local dealer to see if the Carolift 100 suits your car and your mobility device.
Dimensions
| Hoist height | 500 mm |
| Foot width | 220 mm |
| Foot length | 220 mm |
| Lifting device width | 350-550 mm |
| Swivel degree | 360° |
Power
| Voltage | 12 V |
Weights
| Load capacity* | 80 or 100 kg |
| Hoist (incl. foot and electrical kit) |
15 kg |
| Hoist (excl. foot and electrical kit) |
10 kg |
| Mounting kit | 7.8 kg |
| Total weight | 22.8 kg |
* depends on configuration
Testing
| Cycle test approved (31,200) | YES |
| Crash test approved | YES |
| Climate test approved | YES |
| EMC test approved | YES |
| Flammability test approved | YES |
Videos
Phone +357 22 250 115
Fax +357 22 250 116